NEWS INFORMATION
激光加工切割速率影響創口總寬和創口粗糙度。不一樣原材料的厚度，不一樣的激光切割空氣壓力，激光切割速率有一個佳值，這一佳值約為很大激光切割速率的80%。激光切割速率假如太快得話，合理的光點面馬上會縮小，這是由于速率過快造成 機器設備和原材料相互作用力的時間減短。那麼，光纖激光切割的特性對激光切割的速率有什么規定呢，下邊蘇州激光加工切割為大家做下詳細介紹。
The cutting rate of laser processing affects the total width and roughness of the wound. Different thickness of raw materials, different laser cutting air pressure, laser cutting rate has a good value, which is about 80% of the large laser cutting rate. If the laser cutting rate is too fast, the reasonable light spot surface will be reduced immediately, which is due to the reduction of the interaction time between the machine equipment and raw materials due to too fast speed. So, the characteristics of fiber laser cutting on the speed of laser cutting, the following Suzhou laser processing and cutting for you to do a detailed introduction.
假如激光加工切割機的激光切割速率太快，會造成 創口的總寬縮小，因而光線的直射點馬上會挨近，創口還會繼續有拖線，創口的不光滑水平馬上會增大還會繼續有刮渣的狀況。如果激光切割的速率太低，那激光器和原材料她們作用的時間馬上會拉長，他的作用光點總面積也會增大，創口的總寬也會增大。激光加工切割速率不如溶化的速率，剩下的反應熱讓創口開展過多的溶化，這對熱影響的范疇是比較大的。
If the laser cutting speed of the laser cutting machine is too fast, the total width of the wound will be reduced, so the direct point of the light will be close immediately, the wound will continue to have drag line, the unsmooth level of the wound will increase immediately, and there will continue to be scraping slag. If the cutting speed of laser is too low, the time of laser and raw materials will be lengthened immediately, the total area of light spot and the total width of wound will be increased. The cutting rate of laser processing is not as good as the melting rate, and the remaining reaction heat makes the wound melt too much, which has a great influence on the thermal field.
即然激光加工切割機的速率隊激光切割特性有這么大的知名度，那麼我們該怎么知道光纖激光切割的速率呢？因?yàn)榧す馇懈罘?wù)平臺較短，用雙眼沒辦法分辨是不是做到高速運行，我們可運用自動切割機的伺服控制器配用的手機軟件仿真模擬作用來查詢電動機的轉速比是不是做到高。在檢測激光加工切割切速時無需實切，提升交互速率。各軸可分離檢測，也可另外檢測。
That is to say, the speed of laser cutting machine is so well known for its laser cutting characteristics, then how can we know the cutting speed of fiber laser? Because the laser cutting service platform is short, it is impossible to distinguish whether the high-speed operation is achieved with both eyes. We can use the mobile phone software simulation function of the servo controller of the automatic cutting machine to check whether the speed ratio of the motor is high. When the cutting speed is increased, there is no need to detect the cutting speed interactively. Each axis can be tested separately or separately.